Resources
Use the following resources to make the most of your apprenticeship.
- Carpenter Tools
- Hard hat
- Carpenters nail apron
- Handsaw (cross-cut, 8 point, 26 inches)
- Hammer (16 or 20 ounces)
- Combination square (2 inches) and/or steel framing square (2 x 16 x 25 inches, R-100)
- Speed square pocket tape (25 feet or longer)
- Chalk box with line
- Gooseneck bar (26 inches)
- Wood chisels (¼ inch to 1-1/2 inch)
- Cold chisels
- Nail sets
- Utility knife
- Hand level (28 inches)
- Crescent wrench (8 inches, adjustable)
- Block plane
- Screwdrivers (Phillips and slotted)
- Drywall Tools
- Web belt (500 WB)
- Leather tool punch (815)
- Leather nail bag (840)
- Drywall hammer (WH12)
- Circle cutter (AC31)
- Roll lifter (R142)
- Utility saw (6 inches, US71)
- Drywall saw (15 inches, DS15)
- T-square (TS31)
- Magnetic level (48 inches, 88148)
- Tin snips (P6716S)
- Stanley tape measure (25 feet, 3342)
- Drywall utility knife (K799)
- Millwright Tools
- Ball Peen Hammers, 1 lb. and 2 lb.
- Center Punch (small and large)
- Chalk Box with Line
- Chisels (cold), 1/4”, 3/8”. 1/2” and 3/4”
- Combination Square (Start #C434-12-16R or equivalent)
- Combination Wrenches Set 3/4” to 1-1/4”
- Drift Pins Set (approx. 3, small to large)
- Feeler Gauge, 6” length
- Flashlight
- Gasket Scraper and Putty Knife
- Magnet, Mechanics (telescoping)
- Pliers (Lineman, Needle Nose, Side Cutter, Slip Joint/Channel Lock)
- Plumb Bob with Line, 8 oz.
- Pocket Scale (Start #C310K-6 or equivalent)
- Pry/Pinch Bar (small, 18”)
- Screw Driver Set (Slotted and Phillips, 3 ea. minimum)
- Scribe (Carbide Tip)
- Snips, Aviator set
- Socket Set (Deep), 1/2” drive, 1/2” – 1-1/4” sockets
- Socket Set, 1/2” with Ratchet and extensions, not to exceed 1-1/4” socket size
- Socket Set, 3/8” Ratchet and extensions, 3/8”-7/8” socket size
- Tape Measures, 8’/10/12’, 25’ and 50’
- Tool Box (steel with lock)
- Torpedo Level (magnetic)
- Utility Knife, with Blades
- Vise Grip Pliers (curved jaw)
- Wire Cutter (side)
- Wrenches (adjustable 6”, Allen Set 1/8”-1/2”, and adjustable 10” and 12”)